News
Many of you are wondering how JetHome products are designed and assembled. Today we decided to share with you a clear example of how this happens. Below you will see some photos of the assembly process of the JetHome JetHub D1+ controllers.
At the beginning of the process, we carefully prepare all the necessary components to make sure that we can produce high quality products. We then begin assembly following the instructions and procedures we have developed over many years of experience.
We take pride in the fact that every JetHome product undergoes rigorous quality control throughout all stages of production to ensure it will perform flawlessly for years to come.
We hope that these photos will give you a better understanding of how we make our products and that we are working hard to make them the best.
Обновление прошивки до версии 7.4.5
Рады представить новое обновление прошивки для контроллеров JetHub D1+ v3 и USB стиков JetStick Z4 до версия 7.4.5! В этой версии вы найдете несколько важных улучшений: - Обновление до EmberZNet SDK 7.4.5 — повышение стабильности и совместимости с новыми устройствами. - Исправление ошибки ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT — теперь OTA...
Дорогие друзья! Сердечно поздравляем вас с наступающим Новым годом!
Мы искренне благодарны вам за доверие, обратную связь и вдохновение. Это вы — наши пользователи, партнеры и клиенты — делаете JetHome лучше с каждым днем! Спасибо, что остаетесь с нами и поддерживаете наши идеи и начинания. Новый год — это время новых возможностей, и мы с нетерпением ждем момента, чтобы поделиться с вами нашими разработками,...
Firmware update for ZigBee modules based on EFR32MG21: support for EZSP v13 protocol and compatibility with Zigbee2MQTT
We are pleased to announce the release of a new firmware version for ZigBee modules using the EFR32MG21 microcontroller. The update is available for Z4 USB stick and JetHub D1+ v3 controllers . What's new: - Using the latest version of EmberZNet SDK 7.4.3 with EZSP v13: The updated EZSP (EmberZNet Serial Protocol) v13 provides maximum stability...
JetHome is a Russian manufacturer of automation equipment
The company specializes in the development and the production of open Linux controllers, DIN rail controllers with microcontrollers (MCU), as well as Zigbee devices. We are pleased to share with you an interview from the WBCE 2024 conference and exhibition. In this interview we talk about the latest products and plans for the future. Watch the full...
We invite you to WBCE 2024
25 and On April 26, Moscow will host an exhibition and conference on home and industrial automation WBCE 2024, the industry partner of which is HI-TECH BUILDING 2024. Our stand will feature equipment produced by JetHome, as well as a stand demonstrating the operation of controllers JetHome in conjunction with Wirenboard devices. The highlight of the...
DIN rail controller JetHome JetHub E1 v3.0
The JetHome JetHub E1 DIN rail controller has undergone a hardware update in version v3.0. The update affected both the AC and the DC versions. The key difference in v3.0 is the use of a PCA9535 port expander chip instead of the previous PCF8575. This update improves the controller's port expansion capabilities. It is also worth paying...
Video review of the Three-channel battery-powered digital input module (Zigbee) - JetHome WS7!
#66] The best companion for smart lamps on Zigbee 3.0 – JetHome WS7 Video: Watch here Smart lamps cannot be de-energized - I speak this mantra from video within video. This is important because as soon as you turn off the power to a smart lamp, it immediately becomes stupid and cannot be turned on either by automation or by voice. Just power it...
New video review on Pavel's channel!
" Smart home controller on DIN rail with Zigbee, 1wire, RS485, dry contacts JetHome JetHub D1+ "! Video: Watch here In this video we looked at the JetHub D1+ smart home controller. Installed Home Assistant, Zigbee2mqtt. We worked with the built-in relay load. The condition of dry contacts was monitored. We connected the ds18b20 temperature...